Amprobe ACD-330T Clamp-On-Multimeter Instrukcja Użytkownika Pobierz pdf (Strona 14)

5. •))) / Hzm : Continuity, Frequency

• In the Ω position, press this button momentarily to toggle"-)))" continuity ON/OFF.

The continuity buzzer sounds when test value is below 100 counts (10.0 Ω on auto

range). Pushing this button for more than 1 second will exit the continuity function

and return to the auto-ranging ohm measurement.

• Press to restart I ms PEAK hold test after entering PEAK mode.

• In the voltage and Current tests, push this button momentarily to enter dual display

mode. The small digits will indicate frequency reading. The frequency test always auto

range measuring.

6. AUTO / RANGE m :

• In auto-range press this button momentarily to select manual range and turn off the

"AUTO" annunciator.

• In manual range, press this button momentarily to step up 1 range at one time, press

this button for more than 1 second to enter auto-range.

• In auto-range, the " AUTO " annunciator is lit and the meter will select an appropriate

range for measurement being made. If a reading is greater than maximum available

range, " OL"(overload) is displayed on the screen. The meter selects a lower range

when reading is less than about 9% of full scale.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 41 42

Brak uwag

Amprobe ACD-330T Clamp-On-Multimeter Instrukcja Użytkownika Strona 14